Eye Saver Mode Samsung Curved Monitor

Which cable you apply to connect to the monitor will decide how well information technology is able to perform. For instance, some monitors can but perform at their maximum settings (similar refresh charge per unit) when connected with a specific type of cable. (This is typically either HDMI or DisplayPort depending on the model. See your user manual to confirm.)

Other than that exception, you lot will get the best experience past using the least amount of adapters possible and by using the latest and best type of cablevision possible.

Do I need an adapter?

If the port on the monitor and the port on your PC, Mac, or laptop do not match, and then yous will need an adapter or dongle in guild to connect the two. You can find the correct adapter or dongle by looking for one which contains the 2 types of connections you need, and the word "adapter." For instance, i of the nearly common is aUSB-C to HDMI adapter for Macs and laptops. If you use DisplayPort instead, you would instead search for a USB-C to DisplayPort adapter, and so forth. Some adapters are very small, some are longer and chosen dongles, and some replace the entire cable and simply have different plugs on either terminate.

When you are using an adapter, the quality of your connectedness volition be limited to the strength of the weakest link in the chain. For example, if you employ a VGA cable and utilize an adapter to plug information technology into the HDMI port, it will withal just be able to transmit a VGA signal, which is much inferior.

Micro or mini adapters

The terminal type of adapter you might need, and this typically just applies to laptops, is one that converts to a mini or micro version of the same type of cable. First make certain whether your laptop is a "micro" or "mini" version of the port (because that's unlike) so search for the adapter you need, for instance: HDMI to micro HDMI adapter.

Best type of cable or port to apply

Depending on what you have available, here's what will become you the best results from your monitor:

• Best option: Either HDMI or DisplayPort are the recommended selection as the best blazon of connexion to use. Information technology is best to connect HDMI to HDMI or DisplayPort to DisplayPort, but an adapter to catechumen from 1 to the other can be used as a 2nd choice if absolutely needed. Some laptops take a micro or mini version of the port which counts as the aforementioned affair, but will need an adapter (see the previous section for more details). For maximum settings like refresh charge per unit, check your user transmission to see which of these two cables is better for your particular monitor.

• Second all-time option: Using USB-C is going to be the way to go if you have a Mac or laptop that doesn't take an HDMI port or DisplayPort of whatever kind, but does have USB-C. You lot will, withal, demand an adapter to convert to either HDMI or DisplayPort (as mentioned in the previous section almost adapters).

• Acceptable option: Although HDMI and DisplayPort are better, DVI is withal a useful culling for some systems. Make sure to connect the DVI port on one terminate to an equal or better port on the other end. Many cables and adapters can be used for this.

• Backup option: It's not mutual, just using a normal USB port (preferably USB three.0, which is colored bluish) and an adapter or docking station can allow you to connect to a monitor, and then adapt that USB connection to any of the previously mentioned types. This is typically not used as the first monitor for the computer, though. And depending on the hardware used, this type of connection may put some boosted strain on the computer or exceed the maximum amount of monitors the computer can use simultaneously.

  Note: Some monitors tin connect straight USB to USB, although this is rare.

• Concluding Resort: VGA should exist considered your final pick, since it does not include whatsoever of the technological advances seen in the newer connectedness types. If the but port on one device is VGA, then employ a VGA cablevision or VGA adapter to connect to any port on the other device.

Connecting the monitor to the figurer is pretty simple. In fact, you don't even have to turn the calculator off to do it. Once you've found a good identify to put it (non near oestrus sources or anywhere it would be exposed to liquids or oils, similar a kitchen), you tin can brainstorm installing your monitor. Well-nigh models will have a stand up to put together start. Check youruser manual for instructions.

Notation: If you have a Smart Monitor, navigate to Settings > Full general > System Manager and enable Auto Switch Source+. This will crusade the monitor to automatically switch to continued devices.

1. When you know what kind of port yous're using and whatsoever adapters needed (meet the previous section for more information), you can brainstorm setting up your monitor. First, connect your monitor to a power source. Plug one end of the ability cord into the back of the monitor and the other terminate into an outlet.

2. Next, insert one end of the cablevision into your estimator's HDMI, Display port, DVI, or VGA port. And so, connect the other end of the cablevision into the monitor. If needed, use an adapter to connect the two devices.

   Annotation: Information technology's normal for monitors to flicker when a new monitor is continued.

3. Your monitor should be available for use immediately, but for fine-tuning, come across the "Installing drivers and adjusting settings" section.

Note: Setting up a second monitor (or more) has some additional steps. Run across our guide for more information.

Monitors are plug and play. This means that whether y'all're using Windows or a Mac, you plug the monitor in and it merely works, and the operating organization handles everything. All the same, some monitors, especially older ones, may be arranged with (Windows-only) software to work with advanced features. If you're using a Mac and having trouble with the monitor, at that place won't be whatever drivers or software available, just Apple'south troubleshooting for external monitors with a Mac will help yous. Firmware updates (when available) can also be used by both Windows and Mac users.

Note: Information technology is normal for about monitors to not need updates and therefore not accept whatever listed on our site. Yet, if there have been any updates to the software, drivers, or firmware for your monitor, they volition be available in ourDownload Eye. It is only recommended to install the updates if they fix an issue you lot are experiencing or offer a feature that you want.

To finish setup of your monitor subsequently you lot've connected it:

1. If the monitor came with software, use it to install any desired features. Most monitors exercise not demand any software installation to office, although there may be included software for optional features.

2. To get the best performance from your monitor, you'll want to gear up the refresh rate to its maximum, and turn on Gsync or Free-sync if y'all can.

3. Adjacent, adapt the motion picture settings. Samsung monitors come up with all kinds of special picture show settings, so y'all can go the most out of your piece of work or gaming. For example, you tin can plough on Eye Saver mode to forbid heart strain.

4. That'southward it! Enjoy your new Samsung monitor!

Source: https://www.samsung.com/us/support/answer/ANS00085842/

Share this post